Colour Coated Steel Sheet
This material is produced by coating the sheet with paint on a sophisticated coil painting line to the colour of choice. The substrate may be cold rolled, hot dipped galvanised, aluzinc or electrogalvanised material, depending which end application the material is required for. The sheet may be coated both sides with the chosen colour or coated one side with the chosen colour and the reverse side with a neutral colour epoxy primer. Variations to a flat sheet are available with various embossed patterns that are embossed on the material after manufacturing.
SPECIFICATIONS
| Thickness Range: | 0.12mm - 1.0mm |
| Typical End Use: | Roof sheeting, paint pales, garage doors, domestic appliances(stoves and fridges), cold rooms, advertising sign boards, etc. |
| Quality Range: | Commercial Quality |
Hannstar Wrinkle/Matt steel is able to better handle salt, pollution and other deposits that normally cause premature corrosion on metal sheets.
Hannstar steel has superior corrosion resistance, dirt resistance and paint performance properties making it one of the most cost effective building materials for harsh environments.
Let me know your requirements of following;
Thickness(TCT or BMT)
Glossy finish(high,low,matt)
Paint Coating(topside and reverse side)
Substrate( zinc or zinc alloyed with aluminium)
metallic coating (zinc coating or aluzinc coating)
Hardness (soft,commercial,hard,full hard)
paint system(polyester,SMP, HDP, PVDF)
for example:
HOT DIP ALUMINUM ZINC ALLOY COATED STEEL SHEETS IN COIL BASE METAL: ASTM A792,Matt gloss,0.47mm BMT,Wrinkle surface,metallic coating AZ70 (minimum 70g/m² coating of both sides), Grade G550 (minimum yield strength 550 MPa) or G300 (minimum yield strength of 300 MPa), super polyester paint system, 25um on topside and 10um on reverse side.... ...
Our coating mass control technology is amongst the most advanced in the world. The sophisticated coating mass gauge ensure accurate control and consistency of coating mass.